Rako

At RAKO Inc we have been providing mechanical repair services for the industrial and manufacturing sector since 1968 or 40 + years. It became evident that many machine failures were traced to lubrication failure problems. The slide way of the precision machines requires a frequent renewal of way lubricant to be adequately lubricated. Sometimes the... pump is not providing sufficient pressure because of nonfunctioning pump, plugged filters or even broken lines. More over the pump may be working correctly and the metering units have become plugged letting it appear every thing is normal, when the machine is actually experiencing lubrication failure. When lubrication failure is occurring many exterior problems will be evident, such as motor overload alarmspositioning problems as well as way gaulding, and or elevated turcite wear leading to machine accuracy problems. Even though adjustments are made, a problematic condition exists causing frustration as well as poor machine performance or a part quality issue. If your machine is equipped with turcite coated box ways the turcite coating can be completely worn away in a very short time without proper lubrication, letting the machine ways go metal to metal causing elevated damage. There is another condition that presents itself: a dissolvement of the turcite bond line to the machine casting releasing the turcite to eject its self and again letting the machine ways go metal to metal causing accelerated damage. This condition could be occurring in your machine (s) as you are reading this article. If your machine is equipped with lenier ways many of these conditions will not be experienced although increased wear is occurring.Read More