Mr. Tom Shingler

Thomas M. Shingler, P.E., S.E., President, Design Dynamics, Inc.
...
Thomas Shingler, P.E., S.E., is president of Dallas, TX-based Design Dynamics.He has 43 years experience in a wide variety of structural design and analysis, including cold-formed steel panels in field-assembled walls, roof systems and curtainwalls.He is licensed in 18 states and a member of NSPE, Texas Society of Professional Engineers and a board member of ChemLink Adhesives.

& Testing Co. under the direction of Tom Shingler, P.E., Design Dynamics of Dallas, TX, the addition of the Roof Hugger component in re-roofing, increased the existing load capacities by an average of 20% and lateral "stiffening" by some 30%, thus inferring significant increased torsional and lateral stability of the entire structure !

Speaker: Tom Shingler - President/Owner of Design Dynamics Inc

Tom Shingler , President of Design Dynamics , is based in Dallas , Texas.Mr. Shingler is a graduate engineer from Penn State University , and a registered structural engineer in twenty-two US states.He has thirty-four years experience in all areas of metal building and holds patents on a number of roof , wall and curtainwall systems.Mr. Shingler has been a featured lecturer at Metalcon International and lectures on engineering design around the world.Tom Shingler is listed in Who's Who in America and Who's Who in the World.Last year , Mr. Shingler conducted buckling strength , shear stiffness and sheer strength tests on our panels.His observations are in the accompanying letter.

Tom Shingler , P.E. , President ,Design Dynamics , IncRichardson , TX

Join Tom as he presents research findings on the extreme reduction of wind uplift pressures realized with air-permeable architectural metal roof systems.Imagine reducing the tremendous and unusual structural stresses related to high wind load.Learn how these findings , which consider a more efficient and accurate approach in the determination of wind pressure , can make your project safer , easier and less expensive.Tom will address ASCE7 considerations , test methodology , test results and resulting wind equation adjustments.

Tom Shingler , P.E. , is President of Design Dynamics , Inc.He is a registered structural engineer in 20 states with 36 years of testing , analysis and design experience.He lectures extensively on roof and wall systems and holds patents in both fields.

A07All Things Considered :LGSF in Commercial Construction

( 1.5 hours/LUs - HSW )

( December 2004-January 2005 ) By Tom Shingler, P.E.

( December 2004-January 2005 ) By Tom Shingler, P.E.

Tom Shingler, President of Design Dynamics, will oversee the structural engineering and design aspects of the testing and will rate the Steel Panel Foundation systems against optimal structural engineering requirements.