This profile was last updated on //
Is this you? Claim your profile.
Total Cost Involved Inc
1416 West Brooks St.
In 1974, Total Cost Involved Engineering began to set the standard for quality when we built one of the first model 'A' reproduction frames. It took the Classic Car restoration market by storm. Today, we own 32,000 square foot manufacturing facility, wher
Find other employees at this company (13)
(3 Total References)
TCI Mustang Front Suspension Install on our 1965 Mustang Project - StreetLegalTV
"One nice feature about our kit is that the engine mounts are already placed, which allows the engine to bolt directly in place with the included engine mounts," said TCI's sales Manager Evan Dalley.
"We build a tubular 1 -1/8th diameter DOM seamless tubing lower control arm that eliminates the stock strut rod," said Dalley
"The cross member is tucked up higher than a conventional Mustang II front cross member, which gives better ground clearance over a junkyard piece," explained Dalley
"The upper control arm are 1-inch in diameter and both arms use a massive Chrysler screw-in ball joint that is very heavy duty and are easy to replace," said Dalley
Then I went over to TCI ...
Then I went over to TCI and talked to [Sales Manager Evan Dalley] and got myself a rolling chassis in 1996.
Vice President Sal Solorzano has been ...
Vice President Sal Solorzano has been with TCI for 30 years, Sales Manager Evan Dalley has put in 29 years, and Diego Rodarte is the Shop Manager, spending the last 26 years of his life at TCI.
says, "We live it, we breath it.