Bombardier, Inc. is a manufacturer of transportation equipment, including business and commercial aircraft and rail transportation equipment and systems, and is a provider of related services. The Company and its subsidiaries operate in two segments: the aerospace segment (BA) and the... more

Honeywell International Inc. (Honeywell) is a diversified technology and manufacturing company, serving customers worldwide with aerospace products and services, control, sensing and security technologies for buildings, homes and industry, turbochargers, automotive products, specialty... more

Goodrich Corporation (Goodrich) is a supplier of components, systems and services to the commercial and general aviation airplane markets. The Company is also a supplier of systems and products to the global defense and space markets. Its business is conducted on a global basis with... more

Textron Inc. is a multi-industry company that operates in 34 countries. The Company operates its business through four operating segments. Three of the Company’s operating segments represent its manufacturing businesses: Bell, Cessna and Industrial. The fourth segment consists of its... more

Smiths Aerospace is the leading transatlantic aerospace equipment company, with its 11,000 staff and $2 billion revenues split equally between Europe and North America. Smiths Aerospace, a part of Smiths Group plc, holds key positions in the supply chains of all major military and civil... more

GKN Driveline is the world leader in the design and production of driveline components. Producing systems and components for the smallest ultra low-cost vehicle to the most sophisticated four-wheel-drive model, GKN Driveline has the products to achieve the optimum driveline solution. With... more

Aviall, Inc. (NYSE: AVL) is a leading solutions provider of aftermarket supply-chain management services for the aerospace, defense and marine industries. Aviall is comprised of two operating units. As the world's largest independent provider of new aerospace parts and related aftermarket... more

Hexcel Corporation (Hexcel) is an advanced composites company. Hexcel develops, manufactures and markets lightweight, high-performance composites, including carbon fibers, reinforcements, prepregs, honeycomb, matrix systems, adhesives and composite structures, for use in the commercial... more

Precision Castparts Corp. is a manufacturer of complex metal components and products, provides investment castings, forgings and fasteners/fastener systems for critical aerospace and industrial gas turbine (IGT) applications. The Company also provides investment castings and forgings for... more

Heroux-Devtek Inc. specializes in the design, development, manufacture, repair and overhaul of systems and components used in the aerospace and industrial products sectors. It operates in two segments: Aerospace and Industrial Products. The Aerospace segment includes the design,... more

Smiths Group plc delivers products and services for the threat and contraband detection, medical devices, energy and communications markets worldwide. It has three segments: Detection, Medical and Specialty Engineering. Detection designs and manufactures equipment to detect and identify... more

Esterline Technologies Corporation (Esterline) is a specialized manufacturing company principally serving aerospace and defense customers. The Company designs, manufactures and markets engineered products and systems for application within the industries it serves. In addition, its... more

Kaman Aerospace Corp. produces aircraft structures and components for commercial and military aircraft; markets and supports the SH-2G Super Seasprite maritime helicopter and the K-MAX medium- to heavy-lift helicopter; and designs and manufactures safe, arm and fuzing devices for missiles... more

HEICO Corporation (HEICO), through its subsidiaries, is a manufacturer of Federal Aviation Administration-approved jet engine and aircraft component replacement parts, other than the original equipment manufacturers and their subcontractors. The Company is also a manufacturer of various... more

Avcorp Industries Inc. is a Canada-based supplier of subcontract design, fabrication and assembly services to aircraft manufacturers. The Company designs and builds airframe structures for aircraft companies, including Boeing, Bombardier and Cessna. On March 6, 2007, the Company entered... more

Cobham participates in numerous supply chains at any given time and SC21 can provide benefits to the Group both as a customer and as a supplier. Better relationships with key customers are just as valuable as better relationships with key suppliers. To be a signatory to the SC21 Action... more

Since 1986, Thales Computers has supplied leading military and aerospace companies and government programs with COTS-based VMEbus system solutions. Our comprehensive range of standard and rugged PowerPC and Intel hardware and software solutions is in use in open systems around the world.... more

TransTechnology Corporation (http://www.transtechnology.com) operating as Breeze-Eastern (http://www.breeze-eastern.com) is the world's leading designer and manufacturer of sophisticated lifting devices for military and civilian aircraft, including rescue hoists, cargo hooks, and... more

Telesis Technology Corporation (OTC: TLST) is a Diverse Aerospace & Defense Contractor that designs, manufactures and markets a complex range of Structural Aircraft Parts and Precision Aerospace Components and Assemblies. The company maintains 40 acres of facilities that include... more

Ducommun Incorporated (Ducommun), through its subsidiaries, designs, engineers and manufactures aerostructure and electromechanical components and subassemblies and provides engineering, technical and program management services principally for the aerospace industry. These components,... more

TransDigm Inc is a premier supplier of proprietary aerospace components with pro forma 2001 revenues of $257 Million. TransDigm's major product lines include gear pumps, ignition system components, mechanical controls, engineered connectors, NiCd batteries and chargers; lavatory... more

TECT Corporation is a privately held, custom manufacturing services supplier of semi-finished and finished components and assemblies; including, airframe structures, aircraft assemblies, solid and hollow fan blades, compressor blades and vanes, BLISKs, IBRs, impellers, diffusers, turbine... more

PTI is a leader in the design and manufacturing of high performance cleanable metal filters for use in chemical and polymer process applications. These products are ideal for high temperature and high pressure applications, and compatible with highly viscous and/or corrosive chemicals. ... more

Applied Aerospace Structures Corporation (AASC) is a full service provider of complex composite and metal bonded structures and assemblies for both military and commercial applications. Based in Stockton, California, AASC is classified as a small business with approximately 270 employees.... more

The McKechnie Aerospace Electromechanical Group designs, manufactures, and services flight-control linear and rotary actuators and systems, landing gear actuators, blowers, motors, integrated electro-mechanical assemblies and PMA parts. As part of McKechnie Aerospace, the... more

Integrated Aerospace is headquartered in Santa Ana, California with an additional manufacturing facility in nearby Signal Hill. The two buildings total 300,000 sq. ft. and the business has over 200 employees.

Frisby Aerospace has been a leader in the design, manufacture and repair of complex hydraulic and hydro-mechanical aircraft components and systems for over 60 years. The company's diverse product line includes fixed and variable displacement pumps and motors, linear actuators, valves and... more

USAeroteam, Inc was founded in 1985 at Dayton, Ohio, by Suhas Kakde. It was established to manufacture components for the aerospace industry and to complement the automotive business of Tape Tech, Inc., acquired by Suhas Kakde in that same year. Today, USAeroteam has grown... more

Founded in 1961 and located in Farmingdale, New York, GenMech Aerospace is an ISO 9001/AS 9100 registered manufacturer of complex components for the defense and commercial aerospace industries. The company specializes in the manufacture and overhaul of flight critical rotorhead components... more

Kerns provides comprehensive capabilities that include CNC machining, vacuum, hydrogen and aluminum dip brazing, electron beam (60 in. capability and heliarc welding, laser and electrical discharge machining. Our equipment and technology are continuously updated to guarantee that our... more

Stowe Machine Co., Inc. supplies precision machining services, primarily to the aerospace industry. The company specializes in performing the finish machining operations on large and small, standard and complex components. Stowe also maintains a special unit to support customers'... more

Muirhead Aerospace provides technically innovative products and solutions for the Aviation, Defence, Space and Industrial market sectors. We are committed to continual improvement and meeting regulatory requirements and customer expectations. We will achieve this through setting... more

Capo Industries produces highly engineered components for aerospace, turbine engine, industrial gas turbine, and general industrial markets. Since 1977 our customers have described us as a top-rated producer of complex turbine engine components. Performance is built into every component... more

CSLLC has the capacity to manufacture any airfoil surface or major structural component at high production rates. Composite Structures precision parts can be found in virtually every type of aircraft. If it's meant to fly, we can help get it off the ground. Since 1950, Composite... more

MPH is one of the oldest police radar companies. It was founded in Chanute, Kansas in 1976. Within a few short years, MPH had grown to be the largest manufacturer of police radar equipment, supplying law enforcement agencies more than 4000 radars per year. The company remained in... more

Kamatics manufactures high-performance mechanical products used in aviation, marine, hydropower, and other industrial applications. These products are primarily self-lubricated bearings for aircraft flight controls, turbine engines, and landing gear; driveline couplings for helicopters;... more

Commercial Aircraft Products has proudly served the aviation industry for over 30 years. Formed in 1966 to produce wing flap actuators for the general aviation industry, the company's continued commitment to customer integration has led to an expanded product mix. Our products include a... more

Bolt Industries provides Manufacturing support to Medical Device Companies through our state-of-the-art manufacturing equipment, IT integrated supply chain, Quality Management System and trained lean manufacturing staff. Bolt Industries serves many medical markets including medical... more

ERG manufactures its foam materials to suit the requirements of each application. However, we do not sell raw foam materials, as it generally requires unique design and manufacturing procedures to create a useable product. Accordingly, ERG only produces custom, engineered, end-item... more

Paul Lew, our company's founder and President, founded Lew Aerospace in 2002 to design and develop Unmanned Aerial Vehicles (UAVs) for the U.S. military. He also serves as Lew Aerospace's Chief Engineer. While Chief Engineer he also served as Program Manager for Lew Aerospace overseeing... more

Lasticks Aerospace, Inc. is a leading manufacturer of precision aerospace components and assemblies. Lasticks success is made possible because of our continued commitment to Quality Assurance and continual improvement. Our experienced Quality minded staff, and the state of the art... more